MTOW 15kg 3.0KW 160m Cable Auto Reel Tether Power Station
1. Typical characteristics
1). Small size, light weight, backpack storage, easy to carry.
2). Easy to operate, no need to operate tethering box during UAV flight.
3). Comprehensive protection function, fault elimination and self recovery.
4). Automated winch reel system.
5). Airborne power supply constant voltage output, the backup battery has no charging or discharging phenomenon throughout the entire process, without losing power or causing hidden damage.
2. Adaptive drone
1). Support flight altitude: ≥50m/100m/150m (tethered cable 55m/110m/160m, reserved safety length).
2). Support takeoff weight: 10-15kg (drone power efficiency varies, this data is for reference only).
3). Supporting flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).
3. Functional characteristics
1). Automatic reel in/out: Follow the takeoff and landing of the UAV to synchronously cable reel in/out, automated adjust the tension, and backup battery to activate cable reel in function in case of power cut off.
2). Communication function: Wired and wireless communication function, support remote display and control, client-side data viewing and downloading.
3). Protection function: Separate design for strong and weak electricity. Input and output voltage resistance≥3000VDC, tethered cable insulation voltage resistance≥3500VDC. Input overvoltage and undervoltage protection. Output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
4). Data display function: The touch screen displays data such as output voltage, output current,output power, cable outlet length, working duration, installation temperature, total power consumption, fault record, and working status information.
5). Set adjustment: The display screen supports the setting and adjustment of wire winding speed, wire winding tension, wire reel out tension, safety length, date and time, and supports Chinese and English display.
6). Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and beeps to alert.
7). Equipment carrying: With a backpack design, the backpack can be equipped with a complete set of tethering systems, including a tethering box, air module power supply, lighting unit (optional), and other accessories. The overall weight is 12 ± 0.5kg.
8). 5800W/7000Wh outdoor mobile power bank or 4300W/6.0L generator is recommended.
4. Air module (onboard power supply)
5. Ground module
|
Items |
Technical parameters |
|
|
Ambient temperature |
-20~45 ℃ (working), -40~65 ℃ (storage) |
|
|
Relative humidity |
10-80% RH (working), 5-90% RH (storage) |
|
|
Altitude |
≤ 3000m |
|
|
Ground power module |
Input voltage |
176-264Vac wide range input, single-phase 220Vac@45-65Hz |
|
Output power |
3500W (rated long-term output), 3850W (peak value ≤ 30s) |
|
|
Storage cable length |
Standard storage cable 110m, supporting maximum storage cable ≥ 160m |
|
|
Retraction speed |
0-2m/s, adjustable |
|
|
Reel in/out tension |
0-10N, adjustable |
|
|
Interface |
Input aviation plug, fiber optic FC connector (optional), cable output XT60 connector |
|
|
Buttons and switches |
Air switch, high-voltage on/off button, cable forced retraction button, alarm indicator light |
|
|
Size |
450*350*210 ± 0.5mm, excluding foot pads and handles |
|
|
Weight |
12.5 ± 0.5kg, including 110m tethered cable |
|
|
Tether cable |
Material |
Silver plated copper wire wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
|
Fiber optic (optional) |
The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication |
|
|
DC resistance |
10.5 ± 0.2 Ω, 100m@20 ℃ loop |
|
|
Tensile strength |
≥ 50kg, resistant to repeated retraction and release times ≥ 500 times |
|
|
Insulation strength |
≥ 3000Vdc, no breakdown for 1 minute |
|
|
Cable length |
55/110/160m± 2m, supporting customized line length. fiber optic with FC connector (optional), |
|
|
Outer diameter |
2.6 ± 0.2mm |
|
|
Weight |
1.2 ± 0.05kg/100m |
|
|
Air module |
Output voltage |
50 ± 0.5Vdc or 25 ± 0.3Vdc, constant voltage output, supporting voltage customization |
|
Output power |
3000W (rated long-term output), 3500W (peak value ≤ 10s) |
|
|
Protection function |
Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection |
|
|
Isolation voltage |
3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon |
|
|
Installation method |
Reserved installation ears, fixed with screws |
|
|
Heat dissipation method |
Built-in fan for active heat dissipation, reserved air duct for forced air cooling |
|
|
Interface |
Input XT60, output XT90 * 2 |
|
|
Size |
158*134*50 ± 0.5mm, excluding mounting lugs |
|
|
Weight |
1100 ± 20g, without external connectors |
|
